Cleaning treatment of electrolyzer after filtering the electrolyte of oil filter
2018/5/17 Viewers:
After long time use of the mechatronics, the electrode, especially the semi permeable membrane at the bottom of the cathode chamber, is contaminated by the electrolysis products. The electrolysis pool is stuck at the various grinding ports and can not be dismantled. At this time the electrolyzer needs cleaning.
The treatment method is to reverse the electrolyte, rinse with tap water for a few times, then fill the electrolysis pool with cold water, soak the whole cell in cold water (not inundated the wiring), and then slowly heat it to the boiling water, but in this process, special attention should be paid to the impact of the electrolyzer with the beaker wall, after soaking for a certain time, gently It can be removed at each grinding port. After the cathode chamber is dismantled, the internal water is poured out and the cathode room is soaked in the heavy chromium potassium lotion. After a few hours, the cathode chamber is hoisted and then washed out until the bottom of the cathode chamber is white. Wash two times with ethanol and dry with hot air.
The multi-function oil filter developed by the hydraulic oil specialty, adopting the vacuum vacuum pressure principle, heating the infrared carbon fiber, using the latest duplex three-dimensional flash evaporation technology in Germany, the film evaporation technology and the multistage precision filtration, so as to reliably remove the harmful substances in the unqualified oil, such as water, impurity, gas and so on. Oil performance reached the standard of oil. The hydraulic oil and anti wear hydraulic oil, which can emulsify serious turbidity, become clear and transparent after treatment, so as to ensure the normal operation of the hydraulic system, power system and lubrication system.
The treatment method is to reverse the electrolyte, rinse with tap water for a few times, then fill the electrolysis pool with cold water, soak the whole cell in cold water (not inundated the wiring), and then slowly heat it to the boiling water, but in this process, special attention should be paid to the impact of the electrolyzer with the beaker wall, after soaking for a certain time, gently It can be removed at each grinding port. After the cathode chamber is dismantled, the internal water is poured out and the cathode room is soaked in the heavy chromium potassium lotion. After a few hours, the cathode chamber is hoisted and then washed out until the bottom of the cathode chamber is white. Wash two times with ethanol and dry with hot air.
The multi-function oil filter developed by the hydraulic oil specialty, adopting the vacuum vacuum pressure principle, heating the infrared carbon fiber, using the latest duplex three-dimensional flash evaporation technology in Germany, the film evaporation technology and the multistage precision filtration, so as to reliably remove the harmful substances in the unqualified oil, such as water, impurity, gas and so on. Oil performance reached the standard of oil. The hydraulic oil and anti wear hydraulic oil, which can emulsify serious turbidity, become clear and transparent after treatment, so as to ensure the normal operation of the hydraulic system, power system and lubrication system.
- Pre：Troubleshooting of Coulomb ins 2018/5/17
- Next：Precautions for determining mo 2018/5/17