Contact Us

Add: Chongqing Zhongjing Filtration Equipment Manufacturing Co., Ltd. Cave Industrial Park in Shapingba District, Chongqing

Tel: 0086-23-86194345

Tel: 0086-18580036904

Search
Your Position: Home > Support > Update Center

Dimension specification of filter element of DZL lubricating oil purifier

2018/11/26 Viewers:
Performance characteristics of filter element of DZL lubricating oil purifier
First, the continuous polypropylene long fibers produced by melt-blown process are wound with polypropylene as raw material.
Second, high filtration accuracy, large flow rate, uniform structure, large contamination capacity and long service life
Third, good chemical compatibility, without any additives, the fiber is not easy to fall off.
Fourth, it is widely used and cheap.
Detailed Product Introduction Dimensions: Consult 18623439903 Managers
Detailed product hydraulic oil filter: http://www.yyylyj.com
Product characteristics of filter element of DZL lubricating oil purifier
Excellent chemical compatibility for filtration of strong acids, alkalis and organic solvents
The membrane is folded deep filtration with large filtration area.
Low pressure difference, strong ability to absorb pollutants and long service life
Wider selection of filtering accuracy
Purify the air: filter out the smallest impurity particles to protect the engine while satisfying the air inhalation.
Reduce noise: effectively reduce the noise when the engine inhales air;
Fuel saving: 10% fuel saving;
Scope of application: vacuum coating, machinery, CD, metallurgy, petroleum, chemical industry, paper making, food, medicine, electronics, power, ceramics, water diversion, printing and dyeing, sugar making, refrigeration equipment and other fields.
Technical performance of filter element of DZL lubricating oil purifier
Filtration accuracy: 0.1 um0.2 um0.45 um1 UM3 um5 um10 um20 um30 um50 um
Length of filter element: 5 "10" 20 "30" 40"
Diameter of filter element: 69 mm 83 mm 131 mm
The inner diameter of filter element: 28mm~40mm
PH value for trial: 1-12
Maximum operating temperature: <80 ~0.1Mpa
Maximum working pressure: 0.3Mpa 50 C
Maximum Backpressure Difference: 0.2Mpa 25 Temperature
Maximum disinfection temperature: 120 C for half an hour each time
DZL lubricating oil purifier, the equipment uses four-stage filtration dehydration degassing and impurity removal function. First, the oil to be treated is inhaled under vacuum negative pressure. After stainless steel magnetic filter and nanomolecular filter, it is preheated by infrared carbon fiber heater. While the temperature is heated rapidly from low to high, the oil molecules begin to decompose and then enter the third-stage coalescence vacuum oil-water separation filter. In this filter, the first decomposition of oil and water is carried out by the characteristics of the imported filter material of hydrophobic coalescence separation. The larger water molecules are separated by coalescence filter core and enter the tank. The micro-water and oil molecules enter the vacuum tank by distributor to form a short layer of film atomization. After continuous operation of the reactor, the three-dimensional structure is formed in the tank. The multi-layer evaporation structure can achieve the purpose of purification through continuous circulation. Finally, a filtration cycle is completed through the fourth-stage polymer filter element.