Particle size generation and treatment in hydraulic oil filter
2018/5/15 Viewers:
The particle size in the oil is the solid granular mechanical impurity that is precipitated and suspended in the oil; it is expressed as the number and size of the mechanical impurities in the oil per 100ml. Internationally, some advanced countries have strict requirements for the content of mechanical impurities in lubricating oil, and specify specific standards. (1) international aerospace standard NAS1638 provides for table 2-1. The particle pollution of the U. S. Westinghouse and France requirements for the turbine regulation system is roughly equivalent to the NAS standard 5~6 level, and the particle pollution of the lubricating system is required to be roughly equivalent to the NAS standard 7~8 level. (2) the pollution standard of oil in China's turbine oil system is being worked out. According to the actual situation of the pollution degree of the domestic turbine oil system, our initial standards may be slightly wider than the international standards.
The hydraulic oil filter mainly deals with industrial lubricants such as machine oil, hydraulic oil, compressor oil, refrigeration oil and so on. The equipment adopts the vacuum vacuum pressure principle, infrared carbon fiber heating, the latest German new duplex three-dimensional flash technology, film evaporation technology, multi-stage precision filtration, can quickly and effectively remove the moisture in the oil, gas, magazines and volatiles (such as alcohol, gasoline, ammonia and so on) to restore the viscosity of the oil, flash point And use performance. The oil performance is quickly recovered to meet the oil consumption standard. The lubricating oil treated by lubricating oil filter has low emulsifying value, low water content and high impurity precision. It can be reused in high precision hydraulic lubrication equipment at home and abroad. Suitable for oil, chemical, mining, metallurgy, power, transportation, machinery manufacturing, railway and other industries, all kinds of lubricating oil purification and regeneration treatment.
The hydraulic oil filter mainly deals with industrial lubricants such as machine oil, hydraulic oil, compressor oil, refrigeration oil and so on. The equipment adopts the vacuum vacuum pressure principle, infrared carbon fiber heating, the latest German new duplex three-dimensional flash technology, film evaporation technology, multi-stage precision filtration, can quickly and effectively remove the moisture in the oil, gas, magazines and volatiles (such as alcohol, gasoline, ammonia and so on) to restore the viscosity of the oil, flash point And use performance. The oil performance is quickly recovered to meet the oil consumption standard. The lubricating oil treated by lubricating oil filter has low emulsifying value, low water content and high impurity precision. It can be reused in high precision hydraulic lubrication equipment at home and abroad. Suitable for oil, chemical, mining, metallurgy, power, transportation, machinery manufacturing, railway and other industries, all kinds of lubricating oil purification and regeneration treatment.
- Pre：The influence of the method of 2018/5/15
- Next：The production and treatment o 2018/5/15