Working principle of hydraulic oil filter oil filter:

1.vacuum purifier is designed according to the boiling point of water and oil. It is made up of vacuum heating tank, fine filter, condenser, primary filter, vacuum pump, oil drain pump and electric cabinet. Vacuum pump and vacuum tank air to form a vacuum, outside the oil under the influence of the atmospheric pressure oil through the entrance pipe into the primary filter to remove larger particles and then into the heating tank, heated to 40-75 DEG C for automatic level of oil through the valve, the valve is automatically controlled into the vacuum tank. The amount of oil import balance.

2.after heating, the oil swims quickly through the spray wing to separate the oil into semi fog. The water in the oil rapidly evaporates into water vapor and is continuously sucked into the condenser by the vacuum pump, and the water vapor entering the condenser is cooled and then returned to the original water. The oil in the vacuum heating tank is discharged into the filter by the exhaust pump and filtered through the filter core to filter the particles of the particles. Thus, the whole process of removing impurities, water and gas in the oil by vacuum oil filter is completed so that the clean oil is discharged from the outlet.